CMS 803DC BM

by Tannoy

Sold out

$201.98

$100.99

SKU 80017470

Quantity

This item is noncancelable and nonreturnable.

The CMS 803DC BM is a full bandwidth 360-Watt high sensitivity loudspeaker that utilizes our third generation Ceiling Monitor System technology (CMS 3.0). Thanks to an all-new proprietary 8" Dual Concentric pointsource driver with Omnimagnet technology on a Torus Ogive Waveguide, the UL certified CMS 803DC BM delivers wide and consistent broadband directivity with enhanced intelligibility – plus highly accurate and linear response.

Specifications

Frequency Response (-3 dB)	47 Hz - 30 kHz
Frequency Range (-10 dB)	40 Hz - 35 kHz
System Sensitivity (1 W @ 1 m)	92 dB (1 W = 4 V for 16 Ohms)
Nominal Coverage Angle	90 degrees conical
Power Handling	Average: 90 W Programme: 180 W Peak: 360 W
Recommended Amplifier Power	180 W @ 16 Ohms
Nominal Impedance (Lo, Z)	16 Ohms
Rated Maximum SPL	Average: 112 dB Peak: 118 dB Average (with THP60): 110 dB
Transformer Taps (via front rotary switch)	70 V: 60 W (83 Ohms) / 30 W (165 Ohms) / 15 W (330 Ohms) / 7.5 W (660 Ohms) / OFF & low impedance operation 100 V: 60 W (165 Ohms) / 30 W (330 Ohms) / 15 W (660 Ohms) / OFF & low impedance operation
Transducers
Dual Concentric Point Source Driver	1 x 8.0" (200 mm) Dual Concentric driver, using Omnimagnet technology
Low Frequency	1.75" (44 mm) voice coil, treated multi fiber paper pulp cone
High Frequency	1.00" (25 mm) PEI dome
Physical
Enclosure	Back Can: Zinc plated steel Baffle: UL 94 V-0 rated ABS Grille: Steel, with weather resistant coating
Safety Features	Safety ring located at rear of enclosure for load bearing safety bond
Clamping Design	Security toggle clamp. Min / Max clamping range 0.37" ( 9.5 mm ) / 2.36" ( 60 mm ) Recommended clamp torque: 1.5 Nm
Backcan Options	Complete with fixed backcan
Cable Entry Options	Cable clamp & squeeze connector for conduit up to 22 mm
Connectors	Removable locking connector with screw terminals with "loop through" facility
Compliance	UL-1480, UL-2043, CE
Dimensions
Bezel Diameter	12.56" (319 mm)
Front of Ceiling to Rear of Backcan	12.22" (310.5 mm)
Front of Ceiling to Top of Safety Loop	12.90" (327.7 mm)
Hole cutout diameter (all models)	11.61" (295 mm)
Weights
Weight	37.48 lbs (17 kg)

Filter by Type

Tannoy

CMS 803DC BM

Tannoy

Main menu

Join In

Follow us